100V mixer-amplifiers with an integral mixer in a half width 1U housing. 3 switchable mic/line inputs, an RCA line input and a 3.5mm Aux input are governed by front panel volume controls and a Master output control. Mono output to either 100V line or 8 ohms speaker load is connected via a removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.
24V fire alarm mute contacts Supplied with hardware for rack-mounting 2 units 5 input channels 100V line or 8 Ohms operation
Power supply: 170-264Vac, 50Hz (IEC) Amplifier : construction: Class D + transformer output Inputs: Mic/line (combo), 2 x mic/line (6.3mm), line (RCA), aux (3.5mm) Line output: 2 x RCA (mono) Speaker output: Euroblock terminals: 100V / 8 Ohms / Com Mute: 24V relay contacts THD: <0.4% @ 1kHz Input impedance: 1k Ohms (mic/line) Input sensitivity: -10dB (line), -45dB (mic) SNR: 80dB (line), 75dB (mic) Frequency response: 100Hz - 18kHz
ADS - AUDIO DESIGN SERVICES
4 channel 250W power amplifier. Efficient class D amplifiers in 1U case.
Features Include:
4 X 250W power amplifiers
100V or 70V line output
Priority balanced inputs
Program Balanced Inputs
100V line priority inputs (for connection to an existing system)
230Vac or 24Vdc power.
The Slave Amplifier is designed especially for use with A series mixer amplifiers and features a front panel master volume, signal and peak LEDs for level control. The amplifier is powered by mains. A 19" rack-mounting ears is included.