Banner
19" rackmount 2U power amplifiers with fan cooling and output protection. Balanced inputs via 6.3mm ...
19" rackmount 2U power amplifiers with fan cooling and output protection. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter.
Bridge mode for high power mono operation
Switchable clip limiter
Removable handles for low profile install
Power supply: 240Vac, 50Hz (IEC)
Controls: Level channel 1, level channel 2, ground, mode, clip limiter
Input impedance: 20k ohms
Frequency response: 5Hz - 50kHz
Total harmonic distortion: 0.05%
Slew rate: 40V/us
Damping factor: >400
Protection: Short-circuit, overload, D.C. and thermal protect
Download Product Manual
| Power rms @ 4 Ohms: | 150W + 150W |
| Power rms @ 8 Ohms: | 100W + 100W |
| Power rms bridge @ 8 Ohms: | 300W |
| Dimensions: | 88 x 483 x 266mm (2U) |
| Weight: | 8.2kg |
Reference: 953.141UK
Brand: adastra
100V line mixer-amplifier with integral sound source. 5 input channels include a balanced XLR microp...
Reference: 953.196UK
Brand: adastra
100V slave amplifiers built into a half width 1U housing. In addition to RCA line input and output, ...
Reference: 953.408UK
Brand: adastra
Multi-zone amplifiers with 2 microphone inputs and a switchable stereo input for each zone. An inbui...
Reference: 952.976UK
Brand: adastra
The Slave Amplifier is designed especially for use with A series mixer amplifiers and features a front panel master volume, signal and peak LEDs for level control. The amplifier is powered by mains. A 19" rack-mounting ears is included.
Reference: 953.176UK
Brand: adastra
100V mixer-amplifiers with USB audio player, FM tuner and BT wireless receiver in an ultra compact h...
ADS - AUDIO DESIGN SERVICES Features ● Built-in 4 separate amplifier outputs, each channel RMS 120W ● 5 AUX inputs, 3 balanced Mic input with phantom power supply ● 4 remote paging stations, support cascaded linkage ● Each AUX and Mic input with volume and Bass & Treble control ● Each channel can play different audio source and has AUX output...
Reference: 172.054UK
Brand: qtx
Stereo workhorse power amplifiers with multiple input and output connection options. Designed for ac...
Reference: 953.106UK
Brand: adastra
100V mixer-amplifiers with USB audio player, FM tuner and Bluetooth receiver in a half width 2U hous...
Reference: 952.967uk
Brand: adastra
The A30 4 Channel Mixer Amplifier provides 100V line or mono 8 Ohms speaker output. Mic 1 channel has switchable Vox priority function and phantom power for the XLR input. Mic 2 has a jack input and Mic 3 jack input is switchable to line level. Channel 4 is twin RCA mono line level and a single RCA slave output allows the mix to be fed to subsequent...
ADS - AUDIO DESIGN SERVICES Audio Design Services is pleased to launch the new t-series Multi-zone / Multi Source Matrix series of publicaddress systems.At the heart of the range is the ADS T 8x8 Matrix.This clever 8 Zone 3U unit allows 8 signal sources as well as 2 dedicated paging microphones to be allocated into 8 separate zones. With the addition...
Reference: 172.051UK
Brand: qtx
Stereo workhorse power amplifiers with multiple input and output connection options. Designed for ac...
Reference: 172.241UK
Brand: citronic
A range of quad power amplifiers with 4 fully independent channels and individual volume controls. F...
Reference: 953.148UK
Brand: adastra
Public address mixer-amplifier built into a surface-mount secure box. A total output of 180W can dri...
Reference: 953.163UK
Brand: adastra
Mixer-amplifier with 2 separate 120W outputs to 100V or 4/8 Ohms speakers. Inputs for mic, 2 x mic/l...
Reference: 953.402UK
Brand: adastra
Fully featured stereo amplifier with mixer section for 2 microphones and a stereo audio source. An i...
Reference: 953.160UK
Brand: adastra
Zone mixer-amplifier with 6 x 40W class D power section for 100V or 4/8 Ohms speakers. Each zone can...
19" rackmount 2U power amplifiers with fan cooling and output protection. Balanced inputs via 6.3mm ...
