100V slave amplifiers built into a half width 1U housing. In addition to RCA line input and output, the US amplifiers have a 100V input on removable screw terminals, which enables the amplifier to be connected in parallel with existing 100V speakers to extend the system. Mono output to either 100V line or an 8 ohm speaker load is connected via a separate removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.
24V fire alarm mute contacts 100V input for connection in parallel with existing 100V speakers Supplied with hardware for rack-mounting 2 units 100V line or 8 Ohms operation
Power supply: 170-264Vac, 50Hz (IEC) Inputs: Line (RCA), 100V (Euroblock +/-) Amplifier : construction: Class D + transformer output Line output: 2 x RCA (mono) Speaker output: Euroblock terminals: 100V / 8 Ohms / Com Mute: 24V relay contacts THD: <0.4% @ 1kHz Input impedance: 1k Ohms Input sensitivity: -10dB (line) SNR: 80dB Frequency response: 100Hz - 18kHz
ADS - AUDIO DESIGN SERVICES
Audio Design Services is pleased to launch the new t-series Multi-zone / Multi Source Matrix series of publicaddress systems.At the heart of the range is the ADS T 8x8 Matrix.This clever 8 Zone 3U unit allows 8 signal sources as well as 2 dedicated paging microphones to be allocated into 8 separate zones. With the addition...
ADS - AUDIO DESIGN SERVICES
Features
● Built-in 4 separate amplifier outputs, each channel RMS 120W ● 5 AUX inputs, 3 balanced Mic input with phantom power supply ● 4 remote paging stations, support cascaded linkage ● Each AUX and Mic input with volume and Bass & Treble control ● Each channel can play different audio source and has AUX output...