100V mixer-amplifiers with an integral mixer in a half width 1U housing. 3 switchable mic/line inputs, an RCA line input and a 3.5mm Aux input are governed by front panel volume controls and a Master output control. Mono output to either 100V line or 8 ohms speaker load is connected via a removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.
24V fire alarm mute contacts Supplied with hardware for rack-mounting 2 units 5 input channels 100V line or 8 Ohms operation
Power supply: 170-264Vac, 50Hz (IEC) Amplifier : construction: Class D + transformer output Inputs: Mic/line (combo), 2 x mic/line (6.3mm), line (RCA), aux (3.5mm) Line output: 2 x RCA (mono) Speaker output: Euroblock terminals: 100V / 8 Ohms / Com Mute: 24V relay contacts THD: <0.4% @ 1kHz Input impedance: 1k Ohms (mic/line) Input sensitivity: -10dB (line), -45dB (mic) SNR: 80dB (line), 75dB (mic) Frequency response: 100Hz - 18kHz
The A30 4 Channel Mixer Amplifier provides 100V line or mono 8 Ohms speaker output. Mic 1 channel has switchable Vox priority function and phantom power for the XLR input. Mic 2 has a jack input and Mic 3 jack input is switchable to line level. Channel 4 is twin RCA mono line level and a single RCA slave output allows the mix to be fed to subsequent...
● Built-in fm radio, Bluetooth, usb function.● 2 MIC inputs, 2 line inputs, 1 line output.● Speaker output of 100V or 70V & 4 -16 Ω.● Infrared remote control.● With priority function, priority is EMC/MIC1>AUX1/AUX2/MIC2.● With master volume control, individual volume control of MIC & Line, treble and bass volume control.
ADS - AUDIO DESIGN SERVICES
Audio Design Services is pleased to launch the new t-series Multi-zone / Multi Source Matrix series of publicaddress systems.At the heart of the range is the ADS T 8x8 Matrix.This clever 8 Zone 3U unit allows 8 signal sources as well as 2 dedicated paging microphones to be allocated into 8 separate zones. With the addition...
The Slave Amplifier is designed especially for use with A series mixer amplifiers and features a front panel master volume, signal and peak LEDs for level control. The amplifier is powered by mains. A 19" rack-mounting ears is included.
ADS - AUDIO DESIGN SERVICES
Features
● Built-in 4 separate amplifier outputs, each channel RMS 120W ● 5 AUX inputs, 3 balanced Mic input with phantom power supply ● 4 remote paging stations, support cascaded linkage ● Each AUX and Mic input with volume and Bass & Treble control ● Each channel can play different audio source and has AUX output...
ADS - AUDIO DESIGN SERVICES
Features:Compact mini size public address amplifier
Rated power 35W/60W, 70V/100V & 4-8-16Ω output
Line 1-2 input of RCA input and one RCA line output
Mic 1 of 6.35mm in front panel with priority & muting
Mic 2 of balanced XLR in rear panel
Priority level: MIC1>Fire Mute>others
Power supply: AC 110-240V &...
