100V mixer-amplifiers with USB audio player, FM tuner and BT wireless receiver in an ultra compact housing. Microphone input, line input and USB/FM/BT sections are governed by front panel volume controls and a master volume. Mono output to either 100V line or 8 Ohms speaker load is connected via screw terminals on the rear panel. Supplied with hardware for mounting 2 units side by side in a 1U 19" rack space. Designed as a versatile solution for small to medium PA installations.
Ultra compact form factor Efficient class D amplifier design Internal USB/FM/BT audio player 100V line or 8 Ohms operation
Power supply: 170-264Vac, 50Hz (IEC) or 24Vdc Amplifier : construction: Class D + transformer output Audio source: Internal USB/FM/BT player Inputs: 1 x mic (6.3mm), 1 x line (2 x RCA), 1 x aux (3.5mm) Line output: 2 x RCA (mono) Speaker outputs: Screw terminals - 100V / 8 Ohms / Com DC power: 24Vdc screw terminals Mute: 24V relay contacts THD: <0.4% @ 1kHz Input impedance: 1k Ohms (mic/line) Input sensitivity: -10dB (line), -45dB (mic) SNR: 80dB (line), 75dB (mic) Frequency response: 100Hz - 18kHz
● Built-in fm radio, Bluetooth, usb function.● 2 MIC inputs, 2 line inputs, 1 line output.● Speaker output of 100V or 70V & 4 -16 Ω.● Infrared remote control.● With priority function, priority is EMC/MIC1>AUX1/AUX2/MIC2.● With master volume control, individual volume control of MIC & Line, treble and bass volume control.
ADS - AUDIO DESIGN SERVICES
Features:Compact mini size public address amplifier
Rated power 35W/60W, 70V/100V & 4-8-16Ω output
Line 1-2 input of RCA input and one RCA line output
Mic 1 of 6.35mm in front panel with priority & muting
Mic 2 of balanced XLR in rear panel
Priority level: MIC1>Fire Mute>others
Power supply: AC 110-240V &...
The Slave Amplifier is designed especially for use with A series mixer amplifiers and features a front panel master volume, signal and peak LEDs for level control. The amplifier is powered by mains. A 19" rack-mounting ears is included.
The A30 4 Channel Mixer Amplifier provides 100V line or mono 8 Ohms speaker output. Mic 1 channel has switchable Vox priority function and phantom power for the XLR input. Mic 2 has a jack input and Mic 3 jack input is switchable to line level. Channel 4 is twin RCA mono line level and a single RCA slave output allows the mix to be fed to subsequent...
ADS - AUDIO DESIGN SERVICES
This ADS2x20 MICRO 2 CHANNEL AMPLIFIER is ideally suited for installation in areas where the amplifier is not to be seen like a Bathroom, Bedroom, Kitchen, Boat etc it can be wall or ceiling mounted.Attach a docking station and using your iPod you will have all the music you require.Features:. Class D high output mini...
ADS - AUDIO DESIGN SERVICES
● Built-in fm radio, Bluetooth, usb function.● 2 MIC inputs, 2 line inputs, 1 line output.● Speaker output of 100V or 70V & 4 -16 Ω.● Infrared remote control.● With priority function, priority is EMC/MIC1>AUX1/AUX2/MIC2.● With master volume control, individual volume control of MIC & Line, treble and bass volume...
ADS - AUDIO DESIGN SERVICES
A low cost Bluetooth stereo amplifier. Just connect a pair of loudspeakers and your smart phone and play your favourite music.
Add 2 low impedance loudspeakers and play music wirelessly from your Bluetooth device. Has RCA phono inputs also for connection of other devices (CD player, Tuner etc.)
Ideal for small shops,...