High power 100V line slave amplifiers in a 2U rack-mountable housing. Slave inputs can be connected from Adastra RM series mixer amplifiers and slave outputs onto further RS slaves. Master volume control governs output level to either low impedance or 100V speakers. Designed to power medium to large installations from a mixer output or expand existing systems.
RCA slave inputs and outputs 8 ohms and 100V line speaker output Supplied with rack-mount ears 2U 19" rack mountable Peak and signal LEDs
Power supply: 110/240Vac, 50/60Hz (IEC) Input: RCA slave in Output : signal: 2 x RCA Controls: Master volume THD: <1.0% Outputs : speaker: 100V and 8 ohms
ADS - AUDIO DESIGN SERVICES
Audio Design Services is pleased to launch the new t-series Multi-zone / Multi Source Matrix series of publicaddress systems.At the heart of the range is the ADS T 8x8 Matrix.This clever 8 Zone 3U unit allows 8 signal sources as well as 2 dedicated paging microphones to be allocated into 8 separate zones. With the addition...
ADS - AUDIO DESIGN SERVICES
Features
● Built-in 4 separate amplifier outputs, each channel RMS 120W ● 5 AUX inputs, 3 balanced Mic input with phantom power supply ● 4 remote paging stations, support cascaded linkage ● Each AUX and Mic input with volume and Bass & Treble control ● Each channel can play different audio source and has AUX output...
The Slave Amplifier is designed especially for use with A series mixer amplifiers and features a front panel master volume, signal and peak LEDs for level control. The amplifier is powered by mains. A 19" rack-mounting ears is included.
The A30 4 Channel Mixer Amplifier provides 100V line or mono 8 Ohms speaker output. Mic 1 channel has switchable Vox priority function and phantom power for the XLR input. Mic 2 has a jack input and Mic 3 jack input is switchable to line level. Channel 4 is twin RCA mono line level and a single RCA slave output allows the mix to be fed to subsequent...