Banner
2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with in...
2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with integral active crossover. Designed as a cost effective and efficient solution for bi-amplified sound systems where subs and top cabinets are run together from this single amplifier.
Mono summed sub output (can be full range)
Active crossover with variable frequency
Stereo full range output
Connections: 3 x XLRF, 3 x jack, 3 x SPK
Cut-off frequency: 50 - 250Hz (12dB/oct)
Dimensions: 483 x 439 x 88mm
Power supply: 240Vac, 50Hz (IEC)
Controls: 3 x channel level + crossover frequency
Input impedance (balanced/unbalanced): 40k Ohms / 20k Ohms
Damping factor: >250 (20-400Hz @ 8 Ohms)
Slew rate: 6.5V/us
Frequency response: 10Hz - 50kHz (-2dB)
THD +N: 0.04%
Signal to noise ratio: 86dB
Low-cut filter: 30Hz fixed (12dB/oct)
Download Product Manual
| Power rms @ 8 Ohms: | 250 + 250 + 500W (sub) |
| Power rms @ 4 Ohms: | 400 + 400 + 800W (sub) |
| Weight: | 21kg |
| Fuse rating: | F12A |
Reference: 953.408UK
Brand: adastra
Multi-zone amplifiers with 2 microphone inputs and a switchable stereo input for each zone. An inbui...
Reference: 952.976UK
Brand: adastra
The Slave Amplifier is designed especially for use with A series mixer amplifiers and features a front panel master volume, signal and peak LEDs for level control. The amplifier is powered by mains. A 19" rack-mounting ears is included.
Reference: 172.206UK
Brand: citronic
19" rackmount 2U power amplifiers with fan cooling and output protection. Balanced inputs via 6.3mm ...
Reference: 953.404UK
Brand: adastra
Fully featured PA amplifier with 2 independent stereo zone outputs and mixer section for 2 microphon...
Reference: 952.967uk
Brand: adastra
The A30 4 Channel Mixer Amplifier provides 100V line or mono 8 Ohms speaker output. Mic 1 channel has switchable Vox priority function and phantom power for the XLR input. Mic 2 has a jack input and Mic 3 jack input is switchable to line level. Channel 4 is twin RCA mono line level and a single RCA slave output allows the mix to be fed to subsequent...
Reference: 953.179UK
Brand: adastra
100V mixer-amplifiers with USB audio player, FM tuner and BT wireless receiver in an ultra compact h...
Reference: 953.163UK
Brand: adastra
Mixer-amplifier with 2 separate 120W outputs to 100V or 4/8 Ohms speakers. Inputs for mic, 2 x mic/l...
ADS - AUDIO DESIGN SERVICES 4 channel 250W power amplifier. Efficient class D amplifiers in 1U case. Features Include: 4 X 250W power amplifiers 100V or 70V line output Priority balanced inputs Program Balanced Inputs 100V line priority inputs (for connection to an existing system) 230Vac or 24Vdc power.
Reference: 953.196UK
Brand: adastra
100V slave amplifiers built into a half width 1U housing. In addition to RCA line input and output, ...
Reference: 953.213UK
Brand: adastra
A rack-mountable 5-channel mixer amplifier, tailored to commercial sound installations, that can eit...
Reference: 172.111UK
Brand: citronic
Super compact and lightweight stereo power amplifiers in a 1U rack-mountable housing. Fully digital ...
Reference: 953.216UK
Brand: adastra
A rack-mountable 5-channel mixer amplifier, tailored to commercial sound installations, that can eit...
Reference: 172.112UK
Brand: citronic
Super compact and lightweight stereo power amplifiers in a 1U rack-mountable housing. Fully digital ...
Reference: 953.141UK
Brand: adastra
100V line mixer-amplifier with integral sound source. 5 input channels include a balanced XLR microp...
Reference: 953.151UK
Brand: adastra
5-zone amplifier providing up to 60W output per channel with a choice of either 100V or low impedanc...
Reference: 953.091UK
Brand: adastra
Stereo audio amplifier in a minimalist compact housing for concealing in a wall or ceiling cavity to...
2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with in...
