Multi-zone amplifiers with 2 microphone inputs and a switchable stereo input for each zone. An inbuilt media player section offers playback of mp3 audio tracks from USB drive or SD card and also has a B/T wireless receiver and FM radio tuner. A rotary switch for each output zone selects the stereo playback audio from a choice of 2 rear stereo inputs, a front 3.5mm stereo input or the built-in media player. Mic inputs 1 and 2 are live to all output zones at all times. Speakers are connected from the rear panel Euroblock terminals to deliver up to 200W per output at 4 Ohms. Designed for installations requiring high quality stereo sound in multiple rooms or listening areas.
Available with 3 or 4 independent stereo outputs Media player with USB/SD playback FM radio tuner with external aerial connection B/T wireless receiver
Power supply: 230Vac, 50Hz (IEC) Fuse: F5A, 250V Amplifier : construction: Class D Frequency response: 20Hz - 20kHz ±0.5dB Microphone inputs: 2 x 6.3mm jack (mono) Line inputs: Line 1: L+R (6.3mm jack/RCA), Line 2: L+R (RCA) Input sensitivity : line: 0.775Vrms Auxiliary input: 3.5mm stereo jack Input sensitivity : aux: 0.480Vrms Input impedance: 20k Ohms (balanced), 10k Ohms (unbalanced) Audio source: USB/SD mp3 playback, FM tuner, B/T receiver B/T wireless version: 2.3 Input controls: Aux, Media, Line1, Line2, Mic1, Mic2, Talkover Antenna connection: F type (FM tuner) Dynamic range: THD +N: Protection: Thermal, over-current, over-voltage, short-circuit Dimensions: 482 x 300 x 88mm
The A30 4 Channel Mixer Amplifier provides 100V line or mono 8 Ohms speaker output. Mic 1 channel has switchable Vox priority function and phantom power for the XLR input. Mic 2 has a jack input and Mic 3 jack input is switchable to line level. Channel 4 is twin RCA mono line level and a single RCA slave output allows the mix to be fed to subsequent...
ADS - AUDIO DESIGN SERVICES
Features:Compact mini size public address amplifier
Rated power 35W/60W, 70V/100V & 4-8-16Ω output
Line 1-2 input of RCA input and one RCA line output
Mic 1 of 6.35mm in front panel with priority & muting
Mic 2 of balanced XLR in rear panel
Priority level: MIC1>Fire Mute>others
Power supply: AC 110-240V &...
The Slave Amplifier is designed especially for use with A series mixer amplifiers and features a front panel master volume, signal and peak LEDs for level control. The amplifier is powered by mains. A 19" rack-mounting ears is included.
ADS - AUDIO DESIGN SERVICES
Audio Design Services is pleased to launch the new t-series Multi-zone / Multi Source Matrix series of publicaddress systems.At the heart of the range is the ADS T 8x8 Matrix.This clever 8 Zone 3U unit allows 8 signal sources as well as 2 dedicated paging microphones to be allocated into 8 separate zones. With the addition...
ADS - AUDIO DESIGN SERVICES
This ADS2x20 MICRO 2 CHANNEL AMPLIFIER is ideally suited for installation in areas where the amplifier is not to be seen like a Bathroom, Bedroom, Kitchen, Boat etc it can be wall or ceiling mounted.Attach a docking station and using your iPod you will have all the music you require.Features:. Class D high output mini...
