Banner
19" rackmount 2U power amplifiers with fan cooling and output protection. Balanced inputs via 6.3mm ...
19" rackmount 2U power amplifiers with fan cooling and output protection. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter.
Bridge mode for high power mono operation
Switchable clip limiter
Removable handles for low profile install
Power supply: 240Vac, 50Hz (IEC)
Controls: Level channel 1, level channel 2, ground, mode, clip limiter
Input impedance: 20k ohms
Frequency response: 5Hz - 50kHz
Total harmonic distortion: 0.05%
Slew rate: 40V/us
Damping factor: >400
Protection: Short-circuit, overload, D.C. and thermal protect
Download Product Manual
| Power rms @ 4 Ohms: | 450W + 450W |
| Power rms @ 8 Ohms: | 300W + 300W |
| Power rms bridge @ 8 Ohms: | 900W |
| Dimensions: | 88 x 483 x 428mm (2U) |
| Weight: | 13.8kg |
Reference: 953.173UK
Brand: adastra
100V mixer-amplifiers with USB audio player, FM tuner and BT wireless receiver in an ultra compact h...
Reference: 953.186UK
Brand: adastra
100V mixer-amplifiers with an integral mixer in a half width 1U housing. 3 switchable mic/line input...
Reference: 953.199UK
Brand: adastra
100V slave amplifiers built into a half width 1U housing. In addition to RCA line input and output, ...
Reference: 953.029UK
Brand: adastra
Rack-mountable 1U mixer-amp with built-in media player and Bluetooth receiver. 3 mono inputs connect...
Reference: 953.122UK
Brand: adastra
High power 100V line slave amplifiers in a 2U rack-mountable housing. Slave inputs can be connected ...
ADS - AUDIO DESIGN SERVICES The ADS 500 is a 500w 100v line public address amplifier.The ADS 500 amplifier brings more than just basic functionality, ADS reliability and great value to the ADS range for a variety of commercial and industrial installations.The ADS500 amplifier is a 3U mixer amplifier featuring 70V, 100V and 4-16ohm speaker outputs...
ADS - AUDIO DESIGN SERVICES A low cost Bluetooth stereo amplifier. Just connect a pair of loudspeakers and your smart phone and play your favourite music. Add 2 low impedance loudspeakers and play music wirelessly from your Bluetooth device. Has RCA phono inputs also for connection of other devices (CD player, Tuner etc.) Ideal for small shops,...
Reference: 953.196UK
Brand: adastra
100V slave amplifiers built into a half width 1U housing. In addition to RCA line input and output, ...
Reference: 953.183UK
Brand: adastra
100V mixer-amplifiers with an integral mixer in a half width 1U housing. 3 switchable mic/line input...
Reference: 952.976UK
Brand: adastra
The Slave Amplifier is designed especially for use with A series mixer amplifiers and features a front panel master volume, signal and peak LEDs for level control. The amplifier is powered by mains. A 19" rack-mounting ears is included.
Reference: 953.151UK
Brand: adastra
5-zone amplifier providing up to 60W output per channel with a choice of either 100V or low impedanc...
Reference: 172.218UK
Brand: citronic
19" rackmount 2U power amplifiers with dual fan cooling and class H architecture for safe, reliable ...
ADS - AUDIO DESIGN SERVICES This ADS2x20 MICRO 2 CHANNEL AMPLIFIER is ideally suited for installation in areas where the amplifier is not to be seen like a Bathroom, Bedroom, Kitchen, Boat etc it can be wall or ceiling mounted.Attach a docking station and using your iPod you will have all the music you require.Features:. Class D high output mini...
Reference: 953.216UK
Brand: adastra
A rack-mountable 5-channel mixer amplifier, tailored to commercial sound installations, that can eit...
Reference: 953.214UK
Brand: adastra
A rack-mountable 5-channel mixer amplifier, tailored to commercial sound installations, that can eit...
Reference: 953.404UK
Brand: adastra
Fully featured PA amplifier with 2 independent stereo zone outputs and mixer section for 2 microphon...
19" rackmount 2U power amplifiers with fan cooling and output protection. Balanced inputs via 6.3mm ...
