100V line amplifiers with an integral mixer in a half width 2U housing. Inputs for microphones and line input are governed by front panel volume controls with a mixed line output. Mono output to either 100V line or 8 ohms speaker load is connected via a screw terminal connector on the rear panel. Providing cost-effective public address in small to medium installations.
Inputs for microphones and auxiliary line 100V or 8 Ohms operation
Power supply: 230Vac, 50Hz (IEC) Output : signal: 2 x RCA Outputs : speaker: COM / 8 ohms / 100V terminal connector THD: <1% Input : line: 2 x RCA Input impedance : mic: 1.8k Ohms
ADS - AUDIO DESIGN SERVICES
4 channel 125W power amplifier. Efficient class D amplifiers in 1U case.
Features Include:
4 X 125W power amplifiers
100V or 70V line output
Priority balanced inputs
Program Balanced Inputs
100V line priority inputs (for connection to an existing system)
230Vac or 24Vdc power.
5-channel 19" rack-mountable mixer-amplifier, tailored to commercial sound installations to power 100V line speakers or standard speakers down to a 4 Ohm load. Input options include XLR (with switc...
DAB+/FM radio tuner
Bluetooth receiver with unique serial ID
USB/SD audio player
ADS - AUDIO DESIGN SERVICES
Audio Design Services is pleased to launch the new t-series Multi-zone / Multi Source Matrix series of publicaddress systems.At the heart of the range is the ADS T 8x8 Matrix.This clever 8 Zone 3U unit allows 8 signal sources as well as 2 dedicated paging microphones to be allocated into 8 separate zones. With the addition...
The A30 4 Channel Mixer Amplifier provides 100V line or mono 8 Ohms speaker output. Mic 1 channel has switchable Vox priority function and phantom power for the XLR input. Mic 2 has a jack input and Mic 3 jack input is switchable to line level. Channel 4 is twin RCA mono line level and a single RCA slave output allows the mix to be fed to subsequent...
ADS - AUDIO DESIGN SERVICES
4 channel 250W power amplifier. Efficient class D amplifiers in 1U case.
Features Include:
4 X 250W power amplifiers
100V or 70V line output
Priority balanced inputs
Program Balanced Inputs
100V line priority inputs (for connection to an existing system)
230Vac or 24Vdc power.